Energy saving through passive cooling measures using bags with sawdust

Authors

  • VK Bajpai National Institute of Technology
  • S Kumar National Institute of Technology
  • KS Kasana National Institute of Technology

DOI:

https://doi.org/10.17159/2413-3051/2006/v17i2a3265

Keywords:

air-conditioner, passive cooling, energy saving, air temperature, comfort zone, sawdust bags, Tropical Summer Index

Abstract

In recent times, due to limited availability of energy from conventional sources, its effects on the environment (depletion of the ozone layer and an increase in the average temperature of the earth) and their rising prices has drawn the attention of engineers and scientists, throughout the world. The need is being felt to conserve conventional sources of energy or to depend less and less on these sources of energy. One area, where considerable amount of energy is consumed is in creating comfort conditions in residential buildings. In the present work, a passive measure has been used to create comfort conditions in buildings using low cost material in summer. The comfort index used is ‘Tropical Summer Index’. In the test room of size (length = 7.8m, breath = 6m, and height = 3.8m), three fans are needed consuming about 225 watthour of electrical energy to keep the room in the comfort zone. This will eliminate the use of an air conditioner, which consumes a much larger amount of about 4 tons of refrigeration (15 kW). For residential buildings with smaller rooms, the number of fans required will be less. By adopting this measure, the use of an air conditioner can be avoided leading to a saving of electrical energy. It has been observed that during the summer season in India, present passive measures keep the room air conditioned well, within the comfort zone by using a meagre amount of electrical energy.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

Agarwal K.N. and Verma V.V., 1970. Suitability of ricehusk and sawdust as a cold storage insulation. Building Digest (85) Central Building Research Institute Roorkee, India.

Bahadori, M.N. and Haghighat Fariborz, 1986. Thermal performance of adobe structures with domed roofs and moist internal surfaces. Solar Energy, Vol. 36, No.4, pp. 365-375.

Bajpai S.C., 1985. An active and passive solar house, International Journal of Ambient Energy, Vol.6, No. 1, pp. 25-30.

Birol, F. and Argiri, M.,1999. World energy prospects to 2020. Energy, Vol. 24, pp. 905-918.

Cook, J., 1989. Passive cooling. MIT Press, Cambridge Massachusetts.

Enno, A. 1994. Low-energy buildings. Energy and Buildings, Vol.21, pp. 169-174.

Healy, J.D. and Peter Clinch J., 2002. Fuel poverty, thermal comfort and occupancy: results of a national household survey in Ireland. Applied Energy, Vol.73, pp. 329-343.

Kumar, S., 1995. Evaluation of some passive cooling measures for residential buildings. Ph.D. Thesis, KU Kurukshetra.

Kumar, S., Singh, G. and Sharma, J.K., Analytical study of some passive cooling measures using r-c network. Journal of IE (I), Vol. 71, July 1990.

Maheshwari G.P., Al-Ragom F. and Suri R.K., 2001. Energy-saving potential of an indirect evaporative cooler. Applied Energy, Vol. 69, No 1, pp. 69-66.

Olesen Bjarne, W., 2000. Guidelines for comfort, ASHRAE Journal, pp. 41-46.

Piyush, T. 2001. Energy efficiency and building construction in India. Building and Environment, Vol. 36, No. 10, pp.1127-1135.

Sharma M.R., 1977. A study of the thermal effects of climate and building on human comfort with special reference to India. Ph.D. thesis, Agra University, Agra, India.

Subhash, C., 1983, Temperature control in a building with evaporative cooling and variable ventilation. Solar Energy, Vol. 30, No.4, pp. 381-387.

Downloads

Published

2006-05-01

How to Cite

Bajpai, V., Kumar, S., & Kasana, K. (2006). Energy saving through passive cooling measures using bags with sawdust. Journal of Energy in Southern Africa, 17(2), 43–46. https://doi.org/10.17159/2413-3051/2006/v17i2a3265