Developing skills for neutronic modelling of nuclear power reactors in South Africa

Authors

  • Gezekile Nyalunga North-West University
  • Vishana Naicker North-West University
  • Maria du Toit

DOI:

https://doi.org/10.17159/2413-3051/2016/v27i4a1496

Keywords:

Neutronics, PWR, VVER-1000, MCNP6, criticality, reactivity coefficient

Abstract

In recent years, due to economic and social infrastructure development and growth, South Africa has been facing growth in energy demand. Addressing this demand includes building more coal power stations, however with attention paid in designing them to reduce greenhouse gas emissions. A second response is to deploy more power sources using renewable and nuclear energy. The South African government has plans to add about 9.6 GW of nuclear energy to the electricity grid. Accepting that South Africa will seek an international vendor or vendors to supply nuclear plants, a certain degree of localisation of manufacture and operation should be planned. One localisation task that can be actively pursued is reactor analysis, including criticality, burnup, shielding and accident analysis of the reactor. Such development of expertise will support both economic and safety aspects of building and running a nuclear reactor. With this in mind, neutronic analysis of the VVER 1000 reactor was initiated. The government’s intention to build a new fleet of reactors means it is important that the VVER-1000 reactor be included in studies done by the reactor analysis group at the School of Mechanical and Nuclear Engineering at the North-West University. The analysis was performed using MCNP6 for the cold zero power state at the beginning of cycle with the specifications obtained from the open literature. The input file was generated using the in-house code NWURCS. To ensure accuracy and precision of the results produced by the MCNP6 code, convergence studies of the MCNP6 models were carried out. Once a satisfactory model was obtained, the critical reactor state was calculated by adjusting the boron concentration in the water. Furthermore, the control rod worth, reactivity coefficients and beff were also calculated and are reported in this paper.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Gezekile Nyalunga, North-West University

Ph.D. Student at the School of Mechanical and Nuclear Engineering, Faculty of Engineering, North-West University

Vishana Naicker, North-West University

Senior Lecturer at the School of Mechanical and Nuclear Engineering, Faculty of Engineering, North-West University

Maria du Toit

Ph.D. Student at the School of Mechanical and Nuclear Engineering, Faculty of Engineering, North-West University

References

Aghaie M., Zolfaghari A. and Minuchehr A. 2012. Coupled neutronic thermal-hydraulic transient analysis of accidents in PWRs. Annals of Nuclear Energy 50: 158-166.

Agrawal S.K., Chauhan A. and Mishra A. 2005. The VVERs at Kadunkulam. Journal of Nuclear Engineering and Design 236: 812-835.

Allen K. 2003. Advanced polymeric burnable poison rod assemblies for pressurised water reactor. Thesis, M.Eng. Thesis, University of Florida, Florida, USA.

Areva NRC (Nuclear Regulatory Commission). 2012. U.S. EPR Final Safety Analysis Report. Revision for Edition 5. USA.

Bonavigo, L. and De Slave, M. 2011. Issues for nuclear power plants steam generators, steam generator system: Operation reliability and efficiency. Online: www.intechopen.com/books/steam-generator-systems-operational-reliabilityand-efficiency/issues-for-nuclear-power-plants-steam-generators.pdf; accessed 24 February 2016.

Brown, F. 2006. On the use of Shannon entropy of the fission distribution for assessing convergence of Monte Carlo criticality calculations. ANS topical meeting on reactor physics (PHYSOR 2006). Canadian Nuclear Society, Canada.

Buongiorno, J. 2010. PWR description: Engineering of nuclear systems. Open courseware, Centre for Advanced Nuclear Energy Systems (MIT), Cambridge, USA.

Department of Energy (DOE), South Africa. 2013. Integrated Resource Plan for 2010-2030, IRP2010. Online: www.doe-irp.co.za/content/ IRP2010updatea.pdf; accessed 13 November 2015.

Gidropress. 2008. Reactor plant for NPP WWER1000. Online: http://gidropress.pololsk.ru/files/booklets/ en/wwer1000en.pdf; accessed 13 November 2015.

Goldberg, S. and Rosner, R. 2011. Nuclear reactors: Generation to generation. American Academy of Arts and Sciences, Cambridge, USA.

International Atomic Energy Agency (IAEA). 2003. Safety margins of operating reactors: Analysis of uncertainties and implications for decision making. Vienna, Austria.

International Atomic Energy Agency (IAEA). 2006. Current trends in nuclear fuel for power reactors. Vienna, Austria.

Jahanbin, A. and Malmir, H. 2011. Kinetic parameters evaluation of PWRs using static cell and core calculations. Annals of Nuclear Energy 41: 2–6.

Katona, T.J. 2011. Long-term operations of VVER power plants. Online: http://cdn.intechopen.com/ pdfs-wm/19673.pdf; accessed 13 November 2015.

Kosourov, E., Pavlov, V., Pavlovcev, A. and Spirkin E. 2003. Improved VVER-1000 fuel cycle. RRC Kurchatov Institute, Moscow, Russia.

Kostal, M., Rypar, V. and Juricek, V. 2013. The criticality of VVER-1000 mock-up with different H3BO3. Annals of Nuclear Energy 60: 1–7.

Lotsh, T., Khaliminchuk, V. and Kuchin, A. 2010. Correction and additions to the proposal of a benchmark for core burn-up calculations for a VVER-1000 reactor. Online: www.iaea.org/inis/collection/NCLCollectionStore/_Public/41/131/41131407.pdf; accessed 26 November 2016.

Mahlers, Y. 2009. VVER-1000 neutronics calculations with ENDF/B-VII data. Annals of Nuclear Energy 36: 1224–1229.

Michalek, S., Hascik, J. and Farkas G. 2003. Possibilities of delayed neutron fraction calculation and measurement. Online: www.iaea.org/inis/collection/NCLCollectionStore/_Public/40/059/40059715.pdf; accessed 26 November 2016.

Mozafari, M. and Faghihi, A. 2013. Design of annular fuels for a typical VVER-1000 core: Neutronics investigation, pitch optimization and MDBNR calculations. Annals of Nuclear Energy 60: 226–234.

Naicker, V., du Toit, M.H. and Nyalunga, G.P. 2015. NWURCS user guide. North-West University, Potchefstroom, South Africa.

Naicker, V., Maretele, D.A., Reitsma, F., Bostelmann, F. & Strydom G. 2016. Quantification of the SCALE 6.1 eigenvalue uncertainty due to cross section uncertainties for exercise I-1 of the IAEA CRP on HTGR uncertainties. ANS topical meeting on reactor physics (PHYSOR 2016), American Nuclear Society, Sun Valley, USA.

Neeb, K. 1997. The radiochemistry of nuclear power plants with light water reactors. Walter de Gruyter, New York.

Nuttin, A., Capellan, N., David, S., Doligez, X., El Mhari, C. and Meplan, O. 2013. Facing challenges for Monte Carlo analysis of full PWR cores: Towards optimal detail level for coupled neutronics and proper diffusion data for nodal kinetics. Joint International Conference on Supercomputing in Nuclear Applications and Monte Carlo, held 27-31 October, 2013 Paris, France. Editor: D. Caruge, C. Calvin, C.M. Diop, F. Malvagi, and J.-C. Trama. EDP Sciences, 2014, id.02202, 12 pp.

Nyalunga, G.P. 2016. Developing a fresh core neutronics model at 300 K for a VVER-1000 reactor using MCNP6. M.Sc. Dissertation. North-west University, Potchefstroom, South Africa.

Parizandeh, A., Ghaseminerjad, S. and Ghaseminerjad M. 2011. Effect of various spacer grid modelling on the neutronic parameters of the VVER-1000 reactor. Annals of Nuclear Energy 38: 1978–1986.

Pelowitz, D. 2013. MCNP6 user’s manual, version 1.0. Los Alamos National Security, USA.

Rahnema, R. and Douglass, S. 2009. 2-dimensional PWR and BWR whole core benchmark problems. International Conference on Mathematics, Computation Methods and Reactor Physics, held 3-7 May, 2009 Saratoga Springs, New York, USA. Publisher: American Nuclear Society, United States.

Perin, Y., Aures, A. and Salino, V. 2015. Challenge of PWR new core design simulation: A focus on uncertainties due to nuclear data and reflector modelling. Progress in Nuclear Energy 84: 89–96.

Risovany, V.D., Varlashova, E.E. and Suslov D.N. 2000. Dysprosium titanate as an absorber material for control rods. Journal of Nuclear Materials 281: 84–89.

SA-Advocacy. 2015. South Africa’s energy situation fuel pricing in South Africa. Energy advocacy, South Africa. Online: www.energy.gov.za/files/media/Pub/Energy-Advocacy-May2015-Issue-1-newsletter.pdf, accessed 27 November 2016.

Stacey, W. 2007. Nuclear reactor physics (2nd edition). Wiley-VCH, Atlanta, USA.

Stott, A. 2013. The current status of nuclear energy in South Africa. Eskom, Cape Town, South Africa.

Tikhonov, N. 2011. WWER-1000 reactor simulator. General Energy Technologies, Moscow Engineering and Physics institute, Moscow, Russia.

Winkler H. 2006. Energy policies for sustainable development in South Africa. Energy Research Centre, University of Cape Town, South Africa.

Downloads

Published

2016-12-21

How to Cite

Nyalunga, G., Naicker, V., & du Toit, M. (2016). Developing skills for neutronic modelling of nuclear power reactors in South Africa. Journal of Energy in Southern Africa, 27(4), 64–76. https://doi.org/10.17159/2413-3051/2016/v27i4a1496