Thermal modelling of a night sky radiation cooling system

Authors

  • RT Dobson University of Stellenbosch

DOI:

https://doi.org/10.17159/2413-3051/2005/v16i2a3184

Keywords:

sky radiation cooling, night sky radiation cooling, radiation cooling system, thermal modelling

Abstract

The thermal modelling of a night sky radiation cooling system suitable for a room situated in the Namib Desert at Gobabeb, Namibia, is considered in this paper. The system consists of the following components: radiator panels, a single water storage tank, room air-to-water natural convection heat exchangers or convectors, circulating pump(s), interconnecting pipe work and temperature sensors and controls. The mathematical equations describing the thermal behaviour of the various system components are given. These equations are solved using an Excel spreadsheet and the hourly panel surface, water storage tank and room temperatures are calculated for a given internally generated heat load and weather pattern. Given the maximum allowable room temperature, the sizes of the system components may be calculated. The results obtained compared favourably with values reported in the literature. It is thus concluded that the thermal model presented can be used with confidence as a design tool for the sizing of a night sky radiation cooling system.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

Al-nimr, M A, Kodah, Z & Nassar, B. 1998. A theoretical and experimental investigation of a radiative cooling system. Solar Energy, Vol. 63, No. 6, pp 367-373.

Armenta-Déu, C, Doaire T & Hernando, J. 2003. Thermal analysis of a prototype to determine radiative cooling thermal balance. Renewable energy, Vol. 28, pp 1105-1120.

Bethel Business and Community Development Centre. Radiative Cooler, www.leo.co.ls/bbcdc/images_rad. htm.

Dobson, K A, Hodes, G & Mastai, Y. 2003. Thin semiconductor films for radiative cooling applications. Solar Energy Materials& Solar Cells, Vol. 80, pp 283296.

Erell, E and Etzion, Y. 1996. Heating experiments with a radiative cooling system. Building and Environment, Vol. 31, No. 6, pp 509-517.

E Erell, E and Etzion, Y. 2000. Radiative cooling of buildings with flat-plate solar collectors. Building and Environment. Vol. 35, No. 6, pp 297-305.

Etzion, Y, Pearlmutter, D, Erell, E & Meir, I A. 1997. Adaptive architecture: Integrating low-energy technologies for climate control in the desert. Automation in Construction, Vol. 6, pp 417-425.

Lunde, P J. 1980. Solar Thermal Engineering. Wiley, New York.

Mills, A F. 2000. Heat Transfer. Prentice Hall, Upper Saddle River, New Jersey.

Passive Solar Heating and Cooling Design Booklet. 2004. www.azsolarcentre.com/design/passive-3.html.

Stoeker, W F and Jones. 1982. J W. Refrigeration and air conditioning. International Edition, McGraw Hill, New York.

Sun Command Pool Heating. Sonnenkraft solar panels technical broshure, www.suncommand.com.

Torbjörn, M J and Niklasson, G A. 1995. Radiative cooling during the day: simulations and experiments on pigmented polyethylene cover foils. Solar Energy Materials & Solar Cells. Vol. 37, pp 93-118.

Yucon Coil. 2003. Product Catalogue. Marconi Road, Montague Gardens, Western Cape, South Africa.

Downloads

Published

2005-05-01

How to Cite

Dobson, R. (2005). Thermal modelling of a night sky radiation cooling system. Journal of Energy in Southern Africa, 16(2), 20–31. https://doi.org/10.17159/2413-3051/2005/v16i2a3184